In Stock
In StockT8 LED Tubes
LED Tube T8 — Type B (Ballast Bypass)
4 ft ballast-bypass LED tubes that connect directly to 120V or 277V line voltage. No ballast means nearly zero maintenance.
2,000–2,200 lm3000K–5000K15W120–277V
Available color temperatures
2700K3500K4000K5000K6500K
10-Year Warranty
| SKUs | 7050005 · 7050006 · 7050007 · 7050008 |
|---|---|
| Series | T8 LED |
| Wattage | 15W |
| Lumens | 2,000–2,200 lm |
| CCT (color temperature) | 3000K / 3500K / 4000K / 5000K |
| CRI | >80 |
| Beam angle | 340° |
| Input voltage | 120–277V |
| Material | Glass |
| Rated life | 100,000 hours |
| Warranty | 10 years |
- Near-zero maintenance: Bypassing the ballast removes the most common failure point.
- Up to 70% less energy: Meaningful savings compared with fluorescent tubes.
- Flicker-free: Consistent, comfortable light.
- Rugged reliability: Built for busy warehouses, kitchens and demanding environments.
- 10-year limited warranty: Backed by a 10-year limited warranty.
1
Remove the ballast
Disconnect the hot, neutral and socket lead wires to take the ballast out of the circuit.
2
Wire directly
Connect the tube's supply leads directly to your power source (120V or 277V).
3
Use non-shunted tombstones
Non-shunted lamp holders (not included) are required for direct-wire operation.
Installation should be performed by a qualified electrician. Turn off power at the breaker before starting.
Ideal for: Offices, retail stores, warehouses, kitchens, garages.
| SKUs | 7050005 · 7050006 · 7050007 · 7050008 |
|---|---|
| Series | T8 LED |
| Wattage | 15W |
| Lumens | 2,000–2,200 lm |
| CCT (color temperature) | 3000K / 3500K / 4000K / 5000K |
| CRI | >80 |
| Beam angle | 340° |
| Input voltage | 120–277V |
| Material | Glass |
| Rated life | 100,000 hours |
| Warranty | 10 years |
- Near-zero maintenance: Bypassing the ballast removes the most common failure point.
- Up to 70% less energy: Meaningful savings compared with fluorescent tubes.
- Flicker-free: Consistent, comfortable light.
- Rugged reliability: Built for busy warehouses, kitchens and demanding environments.
- 10-year limited warranty: Backed by a 10-year limited warranty.
1
Remove the ballast
Disconnect the hot, neutral and socket lead wires to take the ballast out of the circuit.
2
Wire directly
Connect the tube's supply leads directly to your power source (120V or 277V).
3
Use non-shunted tombstones
Non-shunted lamp holders (not included) are required for direct-wire operation.
Installation should be performed by a qualified electrician. Turn off power at the breaker before starting.
Ideal for: Offices, retail stores, warehouses, kitchens, garages.
Related products
In Stock
In Stock
Sold Out
Fixtures
LED Linear High Bay
12,000–30,000 lm · 4000–5000K · 90–220W
Notify me / Ask about availabilityContact us for our catalog and special offers.
Tell us about your project and we'll match the right product, wattage and color temperature.